Most people who own an iPhone 3G know they can watch videos but they may not know how to exactly. So the following tutorial is dedicated to helping you learn how to watch DVD movies and videos of various sources on your brand new iPhone 3G.

First, let’s take a look at the video/audio formats iPhone 3G supports:?

Video formats supported: H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; H.264 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Baseline Profile up to Level 3.0 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
Audio formats supported: AAC, Protected AAC, MP3, MP3 VBR, Audible (formats 2, 3, and 4), Apple Lossless, AIFF, and WAV

So, in order to enjoy DVD’s and videos on iPhone 3G, you just need to rip the DVD movies and convert the video files to video/audio formats iPhone 3G accepts, and then transfer the output video/audio files to your iPhone 3G with the sync of iTunes Library.

The tool you will need is Clone2go DVD to iPhone Converter. And below is its step by step user guide:

1. Add DVD movies or video files

Click the Open DVD button if the DVD movie you are going to enjoy on your iPhone 3G is on the disc drive. If the DVD movie is saved as a folder on your computer, you need to click the Add Video button to locate that folder, which is composed of two separate folders: VIDEO_TS and AUIDO_TS. From the VIDEO_TS folder, select the .vob file to import and then click OK.

You can also import videos of various sources by clicking the Add Video button. The supporting formats are:

After the DVD or video is imported, you can preview it on the main interface. If you only want a clip of the DVD/video, you can drag the Start to trim and Stop to trim button to get the certain segment.

2. Choose a profile

From the drop-down list of Profile, you can select a profile that best meets your needs:

Note: From the graph above, we can learn Clone2go DVD to iPhone Converter also applies to converting DVD movies and video files to video/audio formats for Apple iPod, Apple TV, YouTube FLV, AVI Video, etc.

3. Start to encode

And now you can click the Start Encode button to starting ripping DVD’s or converting videos for your iPhone 3G.

Note: The output video/audio files are easily available by simply clicking the Folder button on the main menu after the ripping/converting process is done.

iTunes drm files include AAC audio, M4V and M4P video, if you don’t remove itunes drm it’s impossible to play them on any Apple incompatible devices, like Zune, Creative Zen, PSP, mobile Phone, etc. This turns out really bad if you want to buy a new mp3 player which is not manufactured by Apple.

So, The way not to delete itunes drm files, you could try some methods and programs that remove DRM out of the iTunes files. Please note that using programs might be illegal in the country where you are living, make sure you know what you are doing before downloading and using them.

1.    Remove iTunes DRM protection using iTunes + CD-R

Follow these 5 steps:

• Create an iTunes playlist containing your purchased songs.
• Insert a blank CD-R or a CD-RW.
• Burn the playlist to disk.
• Re-import the songs after a successful burn.
• Deleting the original purchased tracks.

2.    Remove iTunes DRM with DRM software in Windows

One of these program is Daninusoft Media Converter Pro which can remove iTunes DRM with its newest version (2.1.3.0). The reason I list it here is the newest version has modified its two major disadvantages compare with the former one: 1. Be compatible with Vista OS.  2. Supports all iTunes DRM files. And with its other advantages: High conversion speed and friendly-use interface it could be a good choice to remove all DRM files.

And with its original advantages:

1. Supports Windows Media DRM files (WMV, WMA).

2. High conversion speed.

3. Supports many other popular standard video and audio files.

4. Friendly-use interface.

It could be a good choice for DRM remove and Media conversion.

3.    Remove iTunes DRM with Apple software in Leopard

The current iteration of iMovie released with the iLife ‘08 software bundle is iMovie 7.1. However, in order to remove DRM protection, you will need iMovie HD - previously bundled with iLife ‘06. Once downloaded and installed, start iMovie HD and ‘Create a New Project’ titled “DRM-free”. Save the project to your Desktop.

In the iMovie window, select the ‘Media’ tab located between ‘Themes’ and  ‘Editing’. You will notice that the top right portion of the interface now offers a media browser. Select the ‘Audio’ tab and locate the playlist which contains purchased music, or search by artist / title.  

Select the DRM-laden song and drag the file from the media browser into the iMovie timeline where it says “Drag audio here to build your project.”

In order to export the song, iMovie requires that a visual image be associated with the audio track - iMovie thinks that it is going to be exporting a movie. Simply drag a blank image (or any other image) to the track above the previously imported audio file. Once iMovie has processed the image, select the ‘Share…’ sub menu item from found inside ‘Share’ in iMovie’s menu bar.

Ensure that ‘Expert Settings’ is selected in the “Compress movie for:” drop-down menu. Selecting ‘Expert Settings’ mode will provide the options to export the file as an audio file. Select the ‘Share’ button.

In the Save as… dialogue, select “Sound to AIFF” in the Export drop-down menu, Choose an appropriate directory for iMovie to export to, title the file, and select ‘Save’. Depending on your machine configuration, iMovie will compress and export the movie project as an audio file in 15-40 seconds.

 Locate the exported AIFF audio file and drag to your iTunes Library. Right-click on the file and select “Convert Selection to AAC”. Once completed, ‘Get Info’ on the new file, edit meta data, add album art, and trash the originally purchased and AIFF audio files from your iTunes library.

It is no doubt PSP is a great game player. But it is also a very good entertainment device which can be used for playing music. Assume you have some songs on your iTunes and are trying to figure out how to put them on your PSP. You copy and paste them in the PSP music folder, however, the PSP doesn’t recognize the songs as music at all. So what’s wrong? Don’t worry! This guide will help you out of the trouble.

The music downloaded from iTunes is under DRM protection. In order to play it on your PSP, you need to strip the DRM off and have the iTunes M4P M4A converted to PSP MP3 format. You can burn the protected M4P music files to CD-R or CD-RW disc to make an audio CD and then use some CD ripper software to convert the audio CD track back to PSP MP3. Also iTunes allows you to burn the protected music files to CD-R or CD-RW disc to make a standard audio CD:

1. Insert a CD-R or CD-RW disc into your CD-ROM drive. You’d better use CD-RW disc as it can be used for more than once.
2. Create a new playlist in iTunes. Add the protected songs to your playlist until you have 72 minutes of music. Click Edit and select Preferences. Select the Advanced tab. Tick the Audio CD option on the Burning tab. Click the Burn Disc button to make an audio CD.
Note: You cannot select the MP3 CD option since it requires the protected music files be converted to unprotected MP3 files.
3. After the audio CD is successfully burned, insert the disc into your CD-ROM drive again. Then you can use iTunes or Windows Media Player to import the music tracks on the burned disc to MP3 files.

Sounds a good idea! But it would be a time consuming process if you have a library of iTunes M4P music files ready to be converted to PSP MP3 for playback on your PSP. And it is a waste of CD discs. Moreover, the information about the M4P music files like title, artist and album will be lost after burning and ripping back to MP3 or WMA files. So this method is not recommended if you have a big collection of iTunes M4P music files ready to be transferred to your PSP.

Here, I would recommend using TuneClone M4P to MP3 Converter to convert iTunes M4P to PSP MP3. It applys the virtual CD burning technology to simulates the burning and ripping process. You just need to burn the iTunes M4P playlist to TuneClone virtual CD burner. Then TuneClone will directly convert the iTunes M4P music list to PSP MP3 for you. It is very fast and the information about each music song will be preserved perfectly. You can follow its the step by step tutorial to learn how to convert iTunes DRM protected M4P music to PSP MP3.

After getting the output MP3 files by adopting either the burn-and-rip method or the way of using TuneClone M4P to MP3 Converter, now you can begin to transfer the MP3 files to your PSP:

1) Connect the PSP to your PC with a USB cable.
2) Press the “home” button on the PSP (it’s a tiny button to the lower left of the screen) then use the left-right directional buttons to find “Settings”, then the up-down buttons to find “USB Connection” on the PSP.
3) Press the “X” button (you got it, the round button with the “X” on it) and your PSP should display “USB Connection”.
4) In a moment or two your computer should tell you that a new USB device has been connected, then show you a new generic hard drive, usually E: or F:
5) Click on the drive letter that corresponds to the PSP unit.
6) Now create a new folder on that drive and name it “psp”.
7) Within the new “psp” folder create another folder, and name it “music”.
Copy your desired mp3 files into the new “music” folder.
9) When you’re done copying your desired music tracks, press the “O” button on the PSP to get out of USB connect mode.

Now you’re ready to go! Use the left-right arrows to move to the music area, then the up-down arrows to find “Memory Stick”. Choose that folder by pressing the “X” button again, and you should be able to find all your favorite music!

Many people are fond of making slideshows on their Windows Movie Maker, however, it won’t let them import any purchased music as it is DRM protected. Since iTunes store tops the music retailer in the world, the following tutorial focuses on how to convert purchased iTunes M4P music to MP3, WAV or unprotected WMA so as to import it to Windows Movie Maker project as background music. The tutorial is composed of the following three parts:

Part 1. Something about Windows Movie Maker

Windows Movie Maker is a totally free program that comes with Windows XP Home Edition, Windows XP Media Center Edition, Windows XP Professional, and Windows Vista. Below are the audio/video formats accepted by Windows Movie Maker:

Video files: .asf, .avi, .wmv
Movie files: MPEG1, .mpeg, .mpg, .mlv, .mp2
Audio files: .wav, .snd, .au, .aif, .aifc, .aiff
Windows media files: .asf, .wm, .wma, .wmv
MP3 format audio: .mp3

Part 2. Remove DRM from iTunes M4P music

The songs you purchased from iTunes store are under DRM protection. You cannot directly import them to your Windows Movie Maker project. However you can burn the protected music files to CD-R or CD-RW disc to make an audio CD and then use some CD ripper software to convert the audio CD track back to MP3, WAV, WMA, etc. And iTunes allows you to burn the protected music files to CD-R or CD-RW disc to make a standard audio CD:

1. Insert a CD-R or CD-RW disc into your CD-ROM drive. You’d better use CD-RW disc as it can be used for more than once.
2. Burn your playlist to make an audio CD. You cannot select the MP3 CD option since it requires the protected music files be converted to unprotected MP3 files.
3. After the audio CD is successfully burned, insert the disc into your CD-ROM drive again. Then you can use iTunes to import the music tracks on the burned disc to MP3 files.

The steps are very simple indeed. Yet, I’d like to introduce a practical application called TuneClone M4P to MP3 Converter. It applies the virtual CD burning technology so that there is no need to use real disc. You can use it to move your library of M4P DRM protected music to the MP3 format that you can use on any player out there worth its salt. This is a useful tool for anyone looking to break their relationship with the iPod. The best part is that it maintains all of the music file’s metadata. You can learn how to remove DRM from iTunes M4P music with TuneClone M4P to MP3 Converter from this guide.

Part 3. Add the output DRM-free music to Windows Movie Maker

After you get the output DRM-free music by adopting either the disc burning/ripping method or virtual CD burning method discussed in Part 2, now you can begin to import it into your Windows Movie Maker project.

Click on File. Then click on Import. A window will appear. In the window, navigate to the sound or music file you want to add to your movie. Then double click on the file. You’ll see the icon for the file in your Windows Movie Maker “collections”. Click on the icon and drag it on to the timeline to the part of the video you want the sound or music to play.

You are considering buying a Microsoft Zune as you broke your iPod or had your iPod stolen. And you bought a lot of songs from iTunes store because you had money left on your iTunes gift card. You still want to enjoy those purchased songs on your Zune MP3 player. Or you own an iPod while your boyfriend/girlfriend has a Zune. And you hope to share the library of M4P music songs purchased from iTunes store under your account with your boyfriend/girlfriend. Here comes the headache! The M4P music you bought from iTunes is DRM-laden! You cannot transfer the iTunes M4P music to the Zune software, not to mention playing the iTunes M4P music on your Zune music player. 

Yet, there seems to be a solution. You can burn the protected M4P music files to CD-R or CD-RW disc to make an audio CD and then use some CD ripper software to convert the audio CD track back to Zune accepted MP3 or WMA. And iTunes allows you to burn the protected music files to CD-R or CD-RW disc to make a standard audio CD. Sounds a good idea! But it would be a time consuming process if you have a library of iTunes M4P music files ready to be converted to Zune MP3 or WMA. Moreover, the information about the M4P music files like title, artist and album will be lost after burning and ripping back to MP3 or WMA files. So this method is not recommended if you have a big collection of iTunes M4P music files ready to be transferred to your Zune.

I’ve made a Google search for programs that can convert iTunes M4P music to Zune WMA MP3, and TuneClone Audio Converter attracted my attention. The edge of TuneClone over other similar programs is that it applys the virtual CD burning technology to simulates the burning and ripping process. You just need to burn the iTunes M4P playlist to TuneClone virtual CD burner. Then TuneClone will directly convert the iTunes M4P music list to Zune WMA or MP3 for you. It is very fast and the information about each music song will be preserved perfectly. Below are several key steps to convert iTunes M4P music to Zune MP3 or WMA using TuneClone Audio Converter.

1. Make settings at TuneClone

Click the Setting button at TuneClone. In the pop-up window, you can specify the output folder, output filenames, output format, etc. for the converted MP3 or WMA files.
Tip: You can get the converted music folder by clicking the Folder button after the whole process.

2. Make settings at iTunes

Click Edit -> Preferences… -> Advanced -> Burning. Select TuneClone’s virtual CD-RW drive as CD burner. In the Disc Format option, tick Audio CD.
Tip 1: In order to keep the information about the music, the Include CD Text option should be checked.
Tip 2: The most important step is to choose the cd burner. Then the software can convert the music files automatically.

3. Create a playlist

Create a playlist, and then add the iTunes M4P music files you want to convert to Zune WMA or MP3 into the playlist. After the conversion, the WMA or MP3 music folder should be located under the folder you specified at first. The name of the music folder should be the same as that of the iTunes playlist you created.
Tip: It is exceedingly easy and fast when you want to batch convert lots of files.

After you get the output folder, now you can transfer it to your Zune software so as to enjoy the iTunes music on your Zune music player.

So, has your headache been removed now?